Blog

Wi-Fi 6E Bridge: When to Upgrade from 5GHz

Spent $3,000 on 6GHz bridges with zero subscriber improvement? Here's when Wi-Fi 6E delivers real ROI — and when 5GHz is still the smarter choice.

Wireless Bridge Installation: 12-Step Checklist

35% callback rate dropped to under 5% with this checklist. Covers line of sight, Fresnel zone, grounding, alignment — every step installers skip.

Wireless Bridge vs Fiber: When to Choose Wireless

$203,000 for a 5 km fiber run vs $1,580 for a wireless bridge pair. Compare real installed costs, failure modes, and deployment speed — not just bandwidth.

How to Build a WISP Network: Complete Equipment Selection Guide (2026)

Most new WISPs over-spend on backbone and under-spec CPE. This layer-by-layer equipment guide covers backhaul, distribution, subscriber CPE, and 4G fallback — with real deployment numbers from African and Southeast Asian projects.

How to Choose a Wireless Bridge for CCTV Backhaul (2026 Integrator Guide)

CCTV integrators waste thousands on wrong wireless bridges. This distance-based selection guide covers 1km to 30km backhaul with real throughput numbers, PoE pairing, and field-tested recommendations from MossLink's engineering team.

Wi-Fi 6 vs Wi-Fi 7: Which Standard Should Your Enterprise Deploy in 2026?

A comparison of Wi-Fi 6 and Wi-Fi 7 for enterprise and B2B buyers. Covers real-world performance differences, client readiness, cost considerations, and deployment timing.

How to Choose the Right Outdoor Access Point for Your Project

A practical buying guide for system integrators and IT managers selecting outdoor wireless access points. Covers IP rating, antenna type, PoE requirements, and deployment scenarios.

How to Share Starlink Internet with Neighbors 5km Away

No trenching, no fiber — just a pair of 5.8 GHz wireless bridges and clear line of sight. Learn the exact equipment, mounting height, and settings to share Starlink with neighbors up to 5 km away at 100 Mbps+.

What Specialized Directional and Omnidirectional Antenna Options Can I Choose for Diverse Coverage Needs?

Can the AP support multiple SSIDs with advanced VLAN tagging for separating guest, subscriber, and management traffic?

What are the specific customization options I can get for OpenWrt firmware, such as captive portal or custom authentication/billing integration?

What is the real-world maximum range and throughput integrators can trust from PtMP?