35 articles in this category.
New WISPs over-spend on backbone and under-spec CPE. Equipment guide: backhaul, distribution, CPE, and 4G fallback with real African deployment numbers.
Featured
CCTV wireless bridge selection guide: 1 km to 30 km, real throughput numbers, PoE pairing, and field-tested recommendations from MossLink engineers.
Featured
A buying guide for integrators and IT managers selecting outdoor wireless APs: IP rating, antenna type, PoE requirements, and deployment scenarios.
Neighbors 5 km away, no fiber in sight? Two outdoor wireless bridges share one Starlink dish at 100–180 Mbps — about $500 in hardware. Setup steps inside.
Directional vs omnidirectional antenna guide: parabolic dishes, sector panels, and high-gain omnis — beamwidth trade-offs and real-world mounting advice.
Multi-SSID lets one access point broadcast separate guest, staff and IoT networks, each on its own 802.1Q VLAN — and why a managed switch is required.
OpenWrt customization for SIs and WISPs: captive portal, RADIUS billing, SQM QoS, multi-tenant SSID, and pre-built images for mass deployment.
Datasheet says 867 Mbps, field delivers 120 Mbps. Real PtMP throughput depends on distance, noise floor, and client density — tested from 5 to 32 km.
Captive portal disappears when you add an AP to MikroTik hotspot? Disable the AP's DHCP and switch to bridge mode — here's the exact two-minute fix.
Deploying wireless bridges in Africa: distance-based selection, 2.4 vs 5 GHz regulations by country, Fresnel zone planning, and regional firmware.
Vendor claims 500m range — we tested it. Real outdoor coverage of a Wi-Fi 6 AX3000 AP at 100m, 200m, and 300m with speed results and mounting tips.
Connect a MossLink AX3000 AP to a MikroTik hotspot in 15 minutes: disable the AP's DHCP, set bridge mode, configure MikroTik hotspot server.